ADDER CCS4USB Specifications download pdf (Page 10)

 





g

Power connection

TheCCS4-USBunitissuppliedwitha12.5Wpoweradapter.Thereisno

on/off switch on the unit, so operation begins as soon as a power adapter is

connected.

2 ConnecttheIECconnectorofthesuppliedcountry-specicpowerleadto

the socket of the power adapter.

To connect the power supply

1 Attachtheoutputleadfromthepower

adapter to the 5V socket on the rear panel

of the unit.

3 Connect the power lead to a nearby main supply socket.

Note: Both the unit and its power supply generate heat when in operation and

will become warm to the touch. Do not enclose them or place them in locations

where air cannot circulate to cool the equipment. Do not operate the equipment

in ambient temperatures exceeding 40 degrees Centigrade. Do not place the

products in contact with equipment whose surface temperature exceeds 40

degrees Centigrade.

Optional RC4 remote control

TheoptionalRC4remotecontrolunit(fullpartnumber:RC4-8P8C)canbeused

to provide direct push button access to any channel from your desktop. The

RC4remotecontrolissuppliedwitha3metrecablethatisusedtolinkwiththe

OPTIONS port on the rear panel of the unit.

To connect the remote control

1 Connecteitherendofthesuppliedcabletothesocketattherearofthe

RC4remotecontrol.

www.adder.com

ADDER

2 ConnecttheotherendofthecabletotheOPTIONS port on the rear panel of

the unit.

2.5A

I N D O O R

U S E

O N LY

OPTIONS

2.5A

I N D O O R

U S E

O N LY

OPTIONS

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 25 26

Comments to this Manuals

No comments

ADDER CCS4USB Specifications Page 10

Comments to this Manuals

Related products and manuals for KVM switches ADDER CCS4USB