ADDER CCS4-USB Specifications download pdf (Page 23)

 





g

Performing upgrades

TheCCS4-USBswitchisfullyupgradeableviaashupgrade.Suchupgrades

require a Windows-based computer system to be linked via the OPTIONS port.

Items required to perform an upgrade

• Thesuppliedashupgradecable(VSC40).

• AWindows-basedcomputerwithanRS232serialport.

• ThelatestversionoftheKVMFirmwareUploaderandrmwarelesforthe

CCS4-USB switch - available from the Technical Support > Updates section

of the Adder Technology website (www.adder.com).

To use the KVM Firmware Uploader utility

1 - Obtain and run the KVM Firmware Uploader.

 DownloadthelatestCCS4-USBswitchKVMFirmwareUploaderfromthe

Adder Technology website and install it on a Windows-based upgrade

computer that will be connected to the CCS4-USB switch. The ﬁles

are supplied as a compressed ZIP ﬁle. Decompress the ZIP ﬁle with an

appropriate tool such as WinZip (www.winzip.com) and copy all contained

ﬁles to the same folder on the upgrade computer.

2 - Power off the CCS4-USB switch

Remove the power supply plug from the rear panel of the switch.

3 - Connect the upgrade computer to the CCS4-USB switch

 Connectthesuppliedashupgradecablebetweentheserialportofthe

Windows-based computer and the OPTIONS port on the rear panel of the

switch.

4 - Invoke upgrade mode

While powering on or when already powered: Press and hold the

COMPUTERandMODEbuttons(foruptotenseconds)untilthenumeric

indicator shows ‘ ’.

5 - Run the KVM Firmware Uploader utility

 Fromthatfolder,selecttheKVMUploadericontoruntheupgradeutility.

TheKVMFirmwareUploaderdialogwillbedisplayed:

6 - Query the CCS4-USB switch

Click the Query Unit button to conﬁrm that communication is possible with

the CCS4-USB switch and to establish its ﬁrmware details. If successful, the

‘Unit connected’ ﬁeld should show the name of the CCS4-USB switch and

the current ﬁrmware will also be listed.

If the application cannot contact the CCS4-USB switch, re-check the

connection cable and click the Advanced... button to check that the correct

serial port is being used. Change the serial port within the Advanced...

section, if necessary.

continued

There is no need to adjust the computer’s serial port

settings as the application will do this automatically.

2.5A

I N D O O R

U S E

O N LY

OPTIONS

(Windows only)

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 32 33

Comments to this Manuals

No comments

ADDER CCS4-USB Specifications Page 23

Comments to this Manuals

Related products and manuals for KVM switches ADDER CCS4-USB