ADDER CCS4-USB Specifications download pdf (Page 12)

 





g

Optional LED monitor indicator connections

TheoptionalCCS-XBmoduleenablesyoutoaddLED(LightEmittingDiode)monitor

indicators to each of your video display screens to show which are active.

Note: The CCS4-USB switch requires ﬁrmware version 2.0 or later to be installed.

Please see here for details about how to check.

The optional CCS-XB module connects to the OPTIONS port of the main CCS4-

USBswitch.EachindividualLEDmonitorindicatorthenconnectstooneofthe

ten ports on the CCS-XB module.

Notes: The CCS-XB module MUST be connected before the switch is powered

on, otherwise the module will not be recognised. Also, if the module is

temporarily disconnected from the switch during operation, communication

between the two will cease and the switch will need to be re-powered with the

CCS-XB module attached.

Before operation of the LED indicators can occur, it is necessary to temporarily

connect the CCS4-USB switch to a Windows computer. This will allow you to

use the Adder Free-Flow application to program the required operation of the

switch. Please see Conﬁguring LED monitor indicators for details about using

the Adder Free-Flow conﬁguration application.

To connect the CCS-XB module and monitor indicators

1 Removepowerfromtheswitch.UsetheatcablesuppliedwiththeCCS-XB

kit to link the module to the OPTIONS port of the CCS4-USB switch.

Note: If the optional RC4 remote control is connected to the OPTIONS port,

remove this ﬁrst. It can be attached to the CCS-XB module later (see here).

2 LinkeachLEDmonitorindicatortoaportontheCCS-XB

module-ports1to4aremostcommonlyused.

www.add

CCS-XB

2.5A

I N D O O R

U S E

O N L Y

OPTIONS

USER

CONSOLE

Adder CCS4-USB

switch

Link cable

Adder P/N: VSC46

(Included in CCS-XB kit)

Adder CCS-XB

module

3 YouneedtotelltheCCS4-USBwhichLED

monitor indicator to illuminate (and in which

colour) for each channel. To do this connect

your computer to the TO KEYPAD OR PC port

of the CCS-XB module (while it remains

connected to the CCS4-USB switch). Please

see the section Conﬁguring LED monitor

indicators.

4 Apply power to the switch.

www.a

CCS-XB

LED monitor indicator

with 3 metre lead

Port 2

Port 3

Port 4

Insert the lead for

the ﬁrst indicator

into port 1

Each indicator has a self adhesive

Velcro tab to assist with mounting

on your video displays.

Flash upgrade cable

Adder P/N: VSC40

(Included in CCS4-

USB kit)

Connect to a vacant

serial port on your

computer

Note: If required,

the PC connection

can be removed

once programming

is complete.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 32 33

Comments to this Manuals

No comments

ADDER CCS4-USB Specifications Page 12

Comments to this Manuals

Related products and manuals for KVM switches ADDER CCS4-USB