ADDER CCS4-USB Specifications download pdf (Page 21)

 





g

Conﬁguring LED monitor indicators

WhentheoptionalCCS-XBLEDmonitorindicatorkitisused,thereareseveral

conﬁguration options available that allow you to customise behaviour and these

are set using the Free-Flow conﬁguration application.

Adjusting colour and brightness for all indicators

If necessary, you can impose default colour and brightness settings upon all

connectedLEDmonitorindicators.ChoosetheConﬁgure > LEDs... menu item

to display the following popup:

4 ChoosetheCCS-XBLEDoutputportthatyouwishtoassociatewiththe

currently selected video screen.

5 Optionally alter the colour, from the Colour:list,thatyouwishtheLED

indicator to display when the associated video screen is selected:

To impose a default colour on all connected indicators, choose the required

Default colour and then tick the option Set all LEDs to this colour.

Use the Default brightness option to determine the intensity of all indicators.

Click OK to exit and apply the required settings.

Note: Once default settings have been made you can optionally change any or

all indicators individually as required using the steps outlined below.

Adjusting individual indicators

For each installed video display screen, you have the opportunity to add and

congureanLEDmonitorindicator.

To adjust details for an individual indicator

1 Double-click on a screen representation (or right click on a screen

representation and then choose Properties) to display the screen popup.

2 ClicktheLED Set-up tab to display the indicator details:

3 For a newly added screen the LED: entry will show No LED. Click on the

dropdownhandleandchoosetheLEDindicatorthatyouwishtoassociate

with the currently selected video display screen:

www.adder.com

CCS-XB

Each entry within the LED: list relates to one of

the ten output sockets on the CCS-XB module.

Note: It is possible to associate any LED

indicator with more than one video screen.

6 ClickOKtosaveandexit.

7 Repeatsteps1to6foreachscreenthatrequiresanLEDmonitorindicator.

8 Choose Conﬁgure > Send Layout to Switch to update the CCS4-USB switch.

9 IMPORTANT: Once the Free-Flow conﬁguration application has

downloaded the setup, remove and reconnect power to the CCS4-USB

to allow the new settings to take effect.

Note: Each LED indicator

can only have one colour,

so if you associate an

indicator with more than

one screen and then

change the colour on a

later screen assignment, it

will be changed for all the

screens in the list for that

LED indicator.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 32 33

Comments to this Manuals

No comments

ADDER CCS4-USB Specifications Page 21

Comments to this Manuals

Related products and manuals for KVM switches ADDER CCS4-USB